CCR Operator

Monitor and control of the Unit/plant Operation parameters and coordinate with the other Operators in regard to all related activities that affect operation.

|| Educational:

• Desired - Diploma in Engineering is a must.
• Preferred - Bachelor of Engineering.

|| Minimum Experience:

• Minimum 5 years in the same position.

|| Desired certification / Job specific skill / Training:

• ISO9001, 14001, OHSAS 18001 awareness/working knowledge is preferred.

|| Required Skills:

• Generic awareness of Quality, Occupational Health & Safety and Environment Management system principles
• Knowledge of identification, classification and disposal of waste
• Knowledge of Emission Monitoring
• Knowledge of environmental and health impact of chemicals being used in the plant
• Knowledge of firefighting equipment
• Knowledge of PPE and safety equipment
• Knowledge of First aid measures
• Should be well conversed with Power/Water plant operational activities.
• Interpersonal communication skills.
• Analytical skills.
• Hazard Risk Assessment capability
• Aspect Impact Assessment knowledge
• Basic computer skills

|| Roles & Responsibilities:

• Comply with safety rules and regulations. Be familiar with the fire equipment in his area.
• Familiar with plant P&IDs, SOPs, Work instructions, Operation and control logics as well as the emergency operation procedures and any other related documents.
• Monitor all parameters of the unit and enter periodic readings on log sheets. Summarize all activities/events that took place during his shift in the log book.
• Follow the instructions of the Shift Charge Engineer and Shift Supervisor and coordinate with other Operators in regard to all activities
• Be alert and take quick actions during abnormal operating conditions.
• Coordinate and ensure Lock Out & Tag Out during the isolation of equipment for maintenance as per the approved Permit To Work procedure. Normalize the equipment after cancellation when instructed to do so.
• Inspect the unit and auxiliaries during the shift to make sure that all equipment parameters are within limits. - Report abnormalities to the Shift Supervisor/ SCE.
• Perform the periodic protection tests under the supervision of SCE/Supervisor and maintain records. Perform equipment change over according to preset schedules.
• Raise work requests or defect notes for faulty equipment and follow up for the defect rectification
• Assist in the training and familiarization of new operators.
• Report near misses and implement prescribed risk controls.
• Report deviations in Quality, Health, Safety and Environmental Management System.
• Ensure proper waste disposal measures.
• Perform other duties as assigned.